You can manipulate this type of file such as adding support and then export back out as STL file. It is universally supported by most if not all 3D design and printing software. STL - this is the file that contains model from design software.
While firmware is technically a software, it is covered in the hardware section. This includes Software for generating supports, hollow object, and slicing model into gcode. If the issue is with slicing (which is currently performed by XYZ Ware), can anyone suggest a 3rd party slicer that works with XYZ printers?Ĭonsidering how much we rely on 3D printing for our business, being unable to print for the last few months is very inconvenient.This section deals with the software tools used to print with Moai. I am of the opinion that the issue may possibly arise during slicing but I cannot prove this myself and XYZ have not suggested this so far (which I would think may have been something they would check and alert me to during initial troubleshooting). Rhino support confirmed that the models were printable with Ultimate and Formlabs software.
I have uploaded the model into 3DHubs and checked that they are good to print. To me this suggests the hardware is fine (models that don’t print on our printer don’t print on XYZ’s own, those that do print do so both with us and XYZ). They sent me a sample file which did print at our end. XYZprinting have also failed to print the models we have sent them, including the ones we received from Rhino.
Rhino support has checked the 3DM and STL files and found no problems. I have been in contact with both XYZprinting and Rhino support to try and find solutions but have not made any progress. A few months back, after a lot of successful prints, we found that our models were unable to print (including designs that previously worked). The printer was bought in December 2017 and all firmware and software (XYZ Ware) is up to date (although the same issue occurred on the software version that previously worked). We are creating models in Rhino 6 and are unable to get them to print on our XYZprinting Nobel 1.0A resin printer. Wanting to see if anyone else has hit the same issues.
0 kommentar(er)
